Simple Wood Finishing

One step Stain and Finish.

I have had the privilege of trying something new recently. Something that you might find very interesting if you refinish furniture.

Staining just doesn’t get any easier than this.

This is what I started with…

I was given two packages of Wood Finishing Cloths and a wine  bottle & glass holder, some sand paper and a clean cloth.

Before staining any wood, you must sand it and make sure it’s dust free.   After sanding peel the label and remove one of the cloths inside.  The label will then close to keep the remaining cloths from drying out.

I should mention that each package of Wood Staining Cloths comes come with handy dandy plastic gloves.

Wipe the staining cloth in the direction of the grain.  The color used for this project is Dark Mahogany.  The product comes in 5 colors.

Wipe the excess stain off with the rag.

If you want a deeper color, allow to dry for one hour before applying a second coat.  I actually did apply a second coat.

Each package will cover 50 sq feet.   Clean up is easy with soap and water.  This stain is for interior use only.

I should mention that this is not only stain but also a finish.  If you prefer a matte look for your wood, this finish is very matte.  If you prefer a slight sheen you might want to finish with something else,  but if you’re after a very rustic, or natural finish, this would be perfect.

I also received this awesome Minwax work apron.  Love it!

This is the finished product.

These staining cloths are extremely simple to use.  Clean up is a snap.  I’d most definitely use them again.

Experience the fast and easy way to wood finishing for yourself.

For more info visit www.minwax.ca